3d Modelj Dlya Chpu Zhurnaljnij Stolik
CPU-Z is a freeware that gathers information on some of the main devices of your system: Processor name and number, codename, process, package, cache levels. Mainboard and chipset. Memory type, size, timings, and module specifications (SPD). 3D models for download, files in 3ds, max, c4d, maya, blend, obj, fbx with low poly, animated, rigged, game, and VR options.
Supports Intel ® HD Graphics Built-in Visuals: Intel ® Quick Sync Video 2.0, Intel ® InTru™ 3D, Intel ® Clear Video HD Technology, Intel ® Insider™, Intel ® HD Graphics 2500/4000 with Intel ® Ivy Bridge CPU - Supports Intel ® HD Graphics Built-in Visuals: Intel ® Quick Sync Video, Intel ® InTru™ 3D, Intel ® Clear Video HD Technology, Intel ® HD Graphics 2000/3000, Intel ® Advanced Vector Extensions (AVX) with Intel ® Sandy Bridge CPU - Pixel Shader 5.0, DirectX 11 with Intel ® Ivy Bridge CPU. Pixel Shader 4.1, DirectX 10.1 with Intel ® Sandy Bridge CPU.
Shared memory 1760MB with Intel ® Ivy Bridge CPU. Shared memory 1759MB with Intel ® Sandy Bridge CPU. - Two graphics output options: Support HDMI and D-Sub ports by independent display controllers - Supports HDMI Technology with max. Resolution up to 1920x1200 @ 60Hz - Supports D-Sub with max.
Resolution up to 2048x1536 @ 75Hz - Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and HBR (High Bit Rate Audio) with HDMI (Compliant HDMI monitor is required) - Supports HDCP function with HDMI port - Supports Full HD 1080p Blu-ray (BD) / HD-DVD playback with HDMI port.
CPU-Z uses a configuration file, cpuz.ini, that allows to set several parameters for the program. The cpuz.ini file must be in the same directory as cpuz.exe. Note that the use of this file is optional. If no.ini file is found, default values will be used. It looks like this: [CPU-Z] TextFontName=Verdana TextFontSize=13 TextFontColor=000060 LabelFontName=Verdana LabelFontSize=13 PCI=1 MaxPCIBus=256 DMI=1 Sensor=1 SMBus=1 Display=1 UseDisplayAPI=1 BusClock=1 Chipset=1 SPD=1 CheckUpdates=1 TextFontName Font used for the information boxes. TextFontSize Size of the font used for the information boxes. TextFontColor Color of the font used for the information boxes.
Value is expressed in hexadecimal, and consists in a classic Red/Green/Blue color code: RRGGBB LabelFontName Font used for the label boxes. LabelFontSize Size of the font used for the label boxes. Sensor Set to OFF (or 0) disables sensor chip detection and voltages measurement.
DMI Set to OFF disables the DMI (Desktop Management Interface) information. This concerns BIOS vendor and version, motherboard vendor and revision. PCI Set to OFF disables the PCI information. This disables chipset, SPD and, depending on the hardware, sensoring information.
MaxPCIBus Sets the maximum PCI bus to scan. Default value is 256. SMBus Set to OFF (or 0) disables SMBus information: SPD, and, depending on the hardware, sensoring information. Display Set to OFF (or 0) disables the video card information reported in the validator. ShowDutyCycles Set to 1, switches the alternate clock computation method based on duty cycles.
0 to disable. UseDisplayAPI Set to 1, uses the display driver to read the display adapters information. 0 to disable. Txt=report Launch CPU-Z in ghost mode: no interface appears, the register dump (report.txt) is automatically created.Example: cpuz.exe -txt=c: mydirectory mysystem: runs CPU-Z in ghost mode. 
Report file mysystem.txt is automatically generated in directory c: mydirectory. -html=report Same as '-txt' but generates the html report file. -core=id Displays clock speed of core #id (id can be set from 0 to 'Number of cores minus one'). It is then possible to check the speed of each core by running as many instances of CPU-Z as necessary, using batch files for example: cpuz0.bat: cpuz.exe -core=0 cpuz1.bat: cpuz.exe -core=1 Note that the current core can be dynamically selected by right-clicking in the CPU page, and select the target core. This feature is available from version 1.42. -console Generates output in a command prompt (Windows XP only).