Autocad Civil 3d 2013 X64 Service Pack 1 Download

This Service Pack includes all previous hotfixes for AutoCAD Civil 3D 2013. It also includes the fixes included in AutoCAD 2013 Service Pack 2 and AutoCAD Map 3D 2013 Service Pack 2.1. Note: This update applies to all language versions and to versions of AutoCAD Civil 3D 2013. Download the latest service packs, hotfixes and other updates for Civil 3D.

Thank you for downloading Autodesk ® AutoCAD ® Civil 3D ® 2016 Service Pack 2. This readme contains the latest information regarding the installation and use of this service pack. It is strongly recommended that you read this entire document before you apply this service pack to your product. For reference, you should save this document to your hard drive or print a copy. This service pack contains the fixes included in Autodesk ® AutoCAD ® 2016 Service Pack 1 and Autodesk ® AutoCAD ® Civil 3D ® 2016 Service Pack 1. For information about the fixes included in those service packs, see the following readme files: Contents • • • • • • • •. Who Should Install This Service Pack?

You can apply this service pack to the following Autodesk products running on all supported operating systems and languages. Be sure to install the correct service pack for your software.

You can also use Autodesk Application Manager to install the Live Update Maintenance Patches, which will automatically show the correct hotfix or service pack for your product. Note: It is not required that you install Autodesk AutoCAD Civil 3D 2016 Service Pack 1 prior to installing this service pack.

Primary Issues Resolved by This Service Pack The following issues have been resolved in Autodesk AutoCAD Civil 3D 2016 Service Pack 2: API • An issue with the Profile.CreateFromFeatureLine styleId parameter has been resolved so that a profile style can now be applied as expected. • An issue where three LabelStyleCollection.Expressions (CantCriticalPointsLabelStyles, AreaLabelStyles, and FlowSegmentLabelStyles) would display an InvalidOperationException has been resolved.

• The Label.SetReferenceTextTarget method now works as expected for a surface reference. Export to DWG/DGN • An issue has been resolved where the display order of objects would change when the drawing was exported to DWG or DGN. General • Having Quick Properties enabled no longer causes a selection issue with AutoCAD Civil 3D objects, where the drawing would lose focus and a second click was required to run a command. Grading and Feature Lines • A change in behavior has been introduced which enables you to create feature lines without specifying a site for them. To create feature lines outside of a site, select the option from the site selection list when you are creating feature lines. Selecting the option adds the feature lines to their own top-level collection on the Prospector tab in Toolspace, underneath the drawing name. Feature lines that are created outside of a site do not interact with each other, so you do not need to specify the style priority for them like you do with feature lines that exist in the same site.

They also do not interact with other objects that they cross, such as alignments, parcels, or survey figures. There are some restrictions on using these feature lines in previous versions of the software: • These feature lines cannot be moved or copied to a site.

• • Digital Download products and Gift Certificates do not count towards the order minimum of $35 USD. • • Coupons applied to an order over $35 USD will not affect eligibility for discounted shipping. • • This offer does not apply to Express Air shipping. Astor piazzolla tango etude no3 pdf. • • We reserve the right to discontinue or change the terms of this offer at any time.

• In a drawing that contains such feature lines, you must create a new site for any new feature lines that you want to add to a site. • An issue has been resolved where extra vertices were created on some feature lines which impacted the ability to create grading projections from those feature lines.

To resolve this issue, run the AUDIT command in any affected drawings after installing the service pack. Hydraflow Storm Sewers • An issue has been resolved where the junction loss was not calculated in Hydraflow Storm Sewers when the flow was supercritical. Labels • An issue has been resolved where parcel labels and tables within an xref would become corrupted if the source drawing was modified. Object Enabler • An issue has been resolved where having the object enabler loaded would cause new objects to be added to a drawing when it was saved, which caused a prompt to be displayed that the drawing needed to be recovered when it was reopened.

• An issue has been resolved where proxy warnings would appear in Autodesk ® AutoCAD LT ® when opening a drawing that contained AutoCAD Civil 3D objects even though the AutoCAD Civil 3D object enabler was installed. Note: To download and install the fixes for the object enabler, go to the. Points • The point creation commands At Alignment Geometry and Profile Geometry Points now honor the specified start and end stations. Pipe Networks and Pressure Networks • An issue has been resolved where user-defined structure descriptions would change to Null Structure when the part was moved or the invert was changed. • An issue has been resolved where pipe invert grips were in the wrong location and had incorrect inverts, and these pipes could not be swapped for other parts. • The Set Sump Depth structure rule now runs as expected without displaying an error. • Synchronizing data shortcut pipes and structures no longer causes the drawing layer settings to revert to the settings specified on the Object Layers tab of the Drawing Settings dialog box.